Our 15 tonne Franna crane hire in Sydney provides a practical solution for lifting and moving loads on construction, industrial and residential sites. Its compact size, articulated steering and pick-and-carry ability make it especially useful where access is restricted or there is limited room to establish a conventional mobile crane.

A Franna crane does not normally require outriggers. It can arrive on site, lift a suitable load and carry it a short distance without repeatedly setting up the crane. This can reduce delays when materials or equipment need to be moved between different parts of a worksite.

The 15 tonne Franna is suitable for many everyday lifting jobs, including steel installation, machinery relocation, building-material handling and loading or unloading heavy items. Contact St George Cranes to discuss the load, site access and lifting radius involved in your project.

15 Tonne Franna Crane Specifications

The 15 tonne rating refers to the crane’s maximum capacity under specified conditions. It does not mean that the crane can lift 15 tonnes at every distance or boom position. Capacity decreases as the lifting radius increases, and it can also be affected by articulation, ground conditions, rigging weight and the way the lift is performed.

Key published specifications for the Franna AT15 series include:

Specification	Published figure
Maximum rated capacity	15 tonnes at a 1.6 m radius
Maximum boom extension	Approximately 17.9 m
Maximum hook height	Approximately 17 m
Capacity at maximum horizontal radius	Approximately 1.05 tonnes at 15.86 m
Articulation	Up to 40 degrees each side
Crane type	Articulated pick-and-carry crane
Outriggers	Not normally required

The manufacturer’s AT15-3 information lists a 15-tonne maximum rating at a 1.6-metre radius, a maximum extension of 17.91 metres and approximately 1.05 tonnes at a 15.86-metre radius.

These figures are a guide only. Every lift must be assessed against the load chart and rated-capacity information for the specific crane being used. The weight of the hook block, slings and other lifting equipment must also be included in the total load.

What Is a 15 Tonne Franna Crane Used For?

The 15t Franna is a versatile workhorse for jobs that require a balance between lifting capacity, reach and access. It is often more efficient than a larger crane when the load falls safely within its lifting chart.

Common applications include:

Moving machinery and industrial equipment
Lifting structural steel and roof beams
Positioning air-conditioning equipment
Handling bricks, blocks and building materials
Installing roof trusses and prefabricated sections
Loading and unloading trucks
Moving equipment within warehouses and yards
Lifting pumps, tanks and generators
Assisting with residential additions and renovations
Repositioning loads around active worksites

Because it can pick up and carry suitable loads, the crane is particularly helpful when an item must be moved rather than simply lifted vertically.

For example, the crane may collect a steel beam from an unloading area, travel across the site and place it closer to the installation point. Every pick-and-carry movement remains subject to the crane’s capacity, ground conditions and an appropriate lifting plan.

A Compact Crane for Tight-Access Sites

Space is often limited on Sydney worksites. Narrow driveways, parked vehicles, boundary walls, overhead services and existing buildings can restrict the type of crane that can reach the lifting area.

Franna cranes use an articulated frame that bends through the centre of the machine. This provides strong manoeuvrability and helps the crane negotiate tighter turns than many conventional vehicles of a similar size. The AT15 operating diagram shows articulation of up to 40 degrees on either side of the centre line.

The crane’s suitability still depends on more than its overall size. Before confirming the booking, we may need to consider:

Access width and height
Turning space
Ground slope and surface condition
Underground services
Overhead powerlines
The weight and dimensions of the load
The distance between the crane and the load
The required placement height
Space for workers and lifting equipment
Pedestrian and vehicle management

Photos, plans and accurate load information can help us identify whether the 15 tonne Franna is the right crane for the job.

Why Choose a 15 Tonne Pick-and-Carry Crane?

Fast setup

A Franna does not rely on conventional outriggers for normal lifting operations. This can shorten setup time and make it easier to complete several lifts across one site. Franna describes its machines as pick-and-carry cranes designed to operate without outriggers and to begin working quickly after reaching the site.

Pick-and-carry capability

The crane can lift a suitable item and travel with it under controlled conditions. This is useful for machinery relocation, construction materials and loads that must be repositioned within a yard or work area.

Articulated steering

The articulated chassis helps the crane move around confined sites and approach lifting points that may be difficult for larger mobile cranes.

Suitable capacity for everyday work

A 15 tonne Franna can handle many common commercial, industrial and residential lifting tasks without bringing a larger crane onto the site unnecessarily.

Efficient for multiple lifts

When materials must be collected from different areas, the crane can move around the site without repeatedly deploying and retracting outriggers.

How Much Can the 15 Tonne Franna Lift?

The answer depends on the lifting radius and configuration.

At short radius, the crane may be capable of lifting close to its maximum rating. As the load moves farther from the front of the crane, its capacity falls. The published AT15-3 chart, for example, shows capacities declining substantially as the radius increases. Articulation beyond 10 degrees can also reduce the available capacity for some lifts.

To help us assess your job, provide:

The load’s confirmed weight
Its length, width and height
The collection point
The final placement point
The approximate lifting radius
The required placement height
Site photographs
Details of any access restrictions

Do not estimate the load weight where verified information is available. Equipment plates, engineering drawings, supplier documents or transport records may provide more reliable figures.

Crane Hire with Qualified Personnel

Crane hire involves more than supplying a machine. Safe lifting requires appropriate planning, communication and trained personnel.

Depending on the job, the service may include:

An experienced crane operator
A qualified dogman
Site and access assessment
Lift planning
Selection of suitable lifting equipment
Coordination with site supervisors
Assistance with traffic-control requirements
Guidance about council permits where required

Our team can review the lift and recommend whether the 15 tonne Franna, 20 tonne Franna, city crane or another crane in our fleet is the most suitable option.

Sydney Areas We Service

We provide crane hire across Sydney, including:

St George
Sutherland Shire
Inner West
Sydney CBD
Eastern Suburbs
North Shore
Northern Beaches
Western Sydney
South Western Sydney
Hills District

Availability and travel charges can vary according to the site location, booking time and expected job duration.

Book a 15 Tonne Franna Crane

Speak with St George Cranes about your load before choosing a crane based on capacity alone. We can consider its weight, lifting radius, access route and final position to determine whether our 15 tonne Franna is suitable.

Send us photographs and basic job details, or arrange a free site inspection for a more complex lift.

Frequently Asked Questions

Does a 15 tonne Franna need outriggers?

A Franna is an articulated pick-and-carry crane and does not normally use outriggers. It lifts on its tyres in accordance with its rated-capacity system and load chart.

Can the crane carry a load around the site?

Yes, a key feature of a Franna is its ability to pick up and carry suitable loads. The travel route, ground conditions, crane speed, load radius and total weight must all be assessed before the movement begins.

Can it lift 15 tonnes at full reach?

No. The 15-tonne figure applies only at a short specified radius. The maximum permitted load reduces as the lifting radius increases.

Is a 15 tonne Franna suitable for residential work?

It can be suitable for steel beams, roof trusses, building materials, air-conditioning equipment and other residential lifts. Access, ground conditions and lifting radius must be checked first.

How do I know whether I need the 15 tonne or 20 tonne Franna?

The decision depends on the load weight, reach, articulation, site access and required safety margin. Providing accurate measurements and photographs allows the crane company to recommend the appropriate machine.

How much does 15 tonne Franna hire cost?

Pricing depends on travel, hire duration, required personnel, lift complexity, timing and site conditions. Supplying clear job information will help us prepare an accurate quote.

15 Tonne Franna Crane Hire Sydney